Ultima 113" Competition Series Twin Cam A Engine

Ultima 113" Competition Series Twin Cam A Engine

  • $4,899.99
    Unit price per 
  • Save $100
Shipping calculated at checkout.


Ultima Competition Series 113" Twin Cam "A" Engine

Part # 298-452

*NON EPA COMPLIANT

120 HP/120 Ft lbs of torque measured at the rear wheel. True SAE numbers/ratings

Ultima® is now offering a complete  competition series hydraulic chain  tensioner engine for Twin Cam®.   Our new 113” Twin Cam is a direct bolt in engine for 99-06 “A” motor Twin Cam bikes
Will work with OEM Manifolds & Throttle Bodies from 1999-2006 
Retains stock Crank Position sensor & Head Temp sensor locations
An absolute drop in application for a great price!!
Some FI tuning or carb tuning will be required along with a clutch upgrade to handle the power.

Just like Ultima’s® EVO® style engines this engine features high quality components at an affordable price.   Cases are cast in a permanent mold from C356-T6 aluminum. These cases utilize Timken sprocket shaft bearings.   The crankshaft assembly is the same crank assemblies Ultima® has been building for years.  Dynamically balanced and featuring forged H-beam rods makes for a rock solid foundation for these engines.  Pistons are forged aluminum from Mahle Motorsports®.  The heads feature conical valve springs, chromoly retainers,  manganese bronze guides, compression releases and stainless steel valves.

Valve train components include an Andrews® 67H set of cams.  Ultima’s® 4140 steel adjustable pushrods and topped off with 4140 forged steel roller rockers.  The cam chest components include a billet oil pump, billet cam support plate with late model hydraulic chain tensioners for peace of mind.  Choices of finish include black, polished or silver.   With plenty of power these engines make a great replacement for a tired stock motor or a custom build. 

113 C.i.
 Displacement:  cc/ci  1853/113 
Bore: 4.000” 
stroke: 4.500” 
Compression: 10.0:1 
Manual Compression Release Valves
 Valve:  Int 2.100” 
Valve:  Ex 1.70”
 Cam lift intake:  .570” 
Cam lift exhaust:  .570” 
Pushrod 4140 adjustable steel 
Piston:  Forged Dome
 Rod length 7.67” 
Flywheel Forged 3 Piece 
Rocker Boxes ‘93 Later EVO 
Rocker Ratio 1.675 
Billet Oil Pump 
******Late Model Hydraulic Chain Tensioners****** 
**********High Quality Billet Cam support Plate********

Cases
 Ultima® cases for Twin Cam utilize Timken® sprocket shaft bearings, late model cam bearings and pinion bearing. Counterbored stainless allen head case bolts. Close machining tolerances. Made from prime C356-T6 aluminum that is superior in strength to A356. styling and cosmetic machining for a custom look.

Crankshaft
Our state of the art designed crankshaft incorporates a massive 1.670 diameter pin that is pressed into the one piece, heat treated, 4140 steel flywheel half making these crankshafts some of the strongest available on the market today. Crank pins are installed with .008” press fit.  These crankshafts feature light weight 7.67” long H-Beam rods with 0.927 diameter wrist pins to handle all the power you can throw at them. These are also balanced using our exclusive methods making these some of the smoothest engines in the industry.

Cylinder
C356 Casting. Cast-in liners will not move.  All fins are machined for an excellent cosmetic appearance.

Cylinder Head
 C356-T6 Casting. All fins are machined for excellent cosmetic appearance.  2.100 stainless Intake Valves. 1.700 stainless Exhaust Valves.  Manganese Bronze guides. High silicon Wire Valve spring with Chromoly Retainer.  Compression release valves.

Comes with a 1 year Manufacturers Limited Warranty
100% Machined & assembled with pride in Pevely, Missouri

We will NOT ship this motor to California
Free shipping does NOT apply to HI, AK, Puerto Rico or Guam